Magiplug for bath tub

  • Availability: Out Of Stock
  • £8.99

Standard Delivery UK  up to £10 is £2.95

Standard Delivery UK between £10 and £50 is £4.95

Standard Delivery UK over £50 is Free

Next Day Delivery is £9.95

European Delivery is £14.95

Worldwide Delivery is £35.00


 

Magiplug is a bath and sink safety plug that works using a pressure activated system.  When an unattended bath reaches a certain depth the pressure plate opens and releases the excess water safely down the waste exit or plughole prior to flooding - this level will be maintained until the taps are turned off.  When the desired level is reached the pressure plate will close again leaving you a filled bath.
The Magiplug is constructed from moulded plastic parts. The seal is maintained by a spring. Compression of this spring under increasing head of water over the plug eventually causes the plug to open, allowing water outflow. At some lower level, the spring will restore a closed position and should shut off outflow. The plastic forming the open / close sealing plate has been modified by the addition of a temperature-sensitive colouring. This aspect of design is to give an immediate visual indication of potentially over-hot bath water.
When the pressure plate turns green this can be taken to indicate water definitely not too hot for safe exposure levels (e.g. for a baby’s bath).
Important: Suitable Depths
Bath - Minimum 15" deep
Kitchen Sinks - Minimum 6.5" deep
Bathroom Basins - Minimum 5" deep
- Any bath/sink/basin measuring more than the above depth recommendations will be suitable for the Magiplug.
- The Magiplug fits the large majority of plugs in the UK, however it will not fit extra-large plugs with a diameter of 50mm or more.

Magiplug is a bath and sink safety plug that works using a pressure activated system.  When an unattended bath reaches a certain depth the pressure plate opens and releases the excess water safely down the waste exit or plughole prior to flooding - this level will be maintained until the taps are turned off.  When the desired level is reached the pressure plate will close again leaving you a filled bath.

The Magiplug is constructed from moulded plastic parts. The seal is maintained by a spring. Compression of this spring under increasing head of water over the plug eventually causes the plug to open, allowing water outflow. At some lower level, the spring will restore a closed position and should shut off outflow. The plastic forming the open / close sealing plate has been modified by the addition of a temperature-sensitive colouring. This aspect of design is to give an immediate visual indication of potentially over-hot bath water.

When the pressure plate turns green this can be taken to indicate water definitely not too hot for safe exposure levels (e.g. for a baby’s bath).  

SPECIFICATION

Overall size: 70mm (2¾")

Diameter of plughole: 44 - 50mm (1¾ - 2")

SPECIAL INFORMATION

Suitable for baths more than 38cm (15") deep

TO WATCH THE VIDEO PLEASE CLICK HERE
 
Key features: 
  • Magiplug is a bath and sink safety plug.
  • When an unattended bath reaches a certain depth the pressure plate opens and releases the excess water safely down the waste exit or plughole prior to flooding.  
Choosing the right product

People react differently to different products. For example, one person might find it helpful to have a recorded message that plays when they open the front door, reminding them to take their keys, while another person might find this confusing. Some people may also be wary of trying new things or find it difficult to learn new skills. Choosing the right product is therefore not always an easy task. The products you purchase should suit the individual and their situation.  

For more information see here.

Always speak to your healthcare professionals before buying equipment to check that it is suitable for you.

 

 

Write a review

Sixth letter of internet?